Below is the table which shows the top 6 best above ground pool vacuum head 2018. Each and every above ground pool vacuum head is chosen by our specialist reviewers.

company-logo

# 1 - Milliard Sea-thru Triangle Weighted Pool And Spa Vacuum Head, 11" Wide Cleaning Surface Safe On Vinyl Lined Pools

Pools are great fun during the summer, but they also need to be properly cleaned and maintained to keep them safe and sanitary all season. No one likes to do the cleaning, but Milliard makes it easy with our Sea-Thru Triangle weighted vacuum head, so you can get back to swimming sooner.Get the PointThis specially designed vacuum attachment literally sinks into the deep end when faced with algae and pool grime. Its triangular plastic body is shaped for maneuverability so it can swivel and twist through corners, along walls, and into crevices that may escape other cleaning devices. The spring-loaded…


  • Handle has spring-loaded locking clips for attaching standard extension poles, and the vacuum port fits 1½ and 1¼ inch standard vacuum hoses
  • Triangular plastic body is see-thru for maneuverable and accurate vacuuming along walls and into corners for a more complete clean.
  • Weights keep the vacuum head at the bottom of the pool where it belongs. Rubber bumpers at the sides prevent scratching or scraping of vinyl pool liners
  • Nylon bristles at the bottom are gentle on pool floors and specially angled to funnel dirt, not push it around.
  • Vacuum head is molded from ABS plastic to be durable, long lasting, and resistant to typical pool chemicals. Cleaning surface is 11in. wide.


company-logo

# 2 - Milliard Pool And Spa Vacuum Head - 13" Wide

Pools are great fun during the summer, but they also need to be properly cleaned and maintained to keep them safe and sanitary all season. No one likes to do the cleaning, but Milliard makes it easy with our Air-Relief Vacuum Head, so you can get back to swimming sooner. This specially designed vacuum attachment literally vents under pressure when it sticks to vinyl pool liners. Its dual relief valves release suction when the vacuum face becomes clogged or seals too tightly against the pool floor, which reduces strain on the filter-pump and prevents the vacuum from pulling up your…


  • Handle has spring-loaded locking clips for attaching extension poles.
  • Air-relief valves release excess suction and weighted to allow easier movement on the pool floor and to prevent stress on the filter-pump and accidental damage to pool liners.
  • Compatible with both 1.25" and 1.5" vacuum hoses.
  • Made from ABS plastic to be durable and long-lasting.
  • 13.5 inches wide for faster and easier cleaning. Perimeter vinyl pool safe brushes to help loosen algae.


company-logo

# 3 - Xtremepowerus Automatic Suction Vacuum-generic Climb Wall Pool Cleaner

Instructions: Cleaner will not go into a shallow end that is less then 3ft deep.The hoses may not connect too tight so that the pool cleaner can move freely and reach more spots. Minor air leaking from the connection is normal. The cleaner won't pick up leaves and articles.


  • 10 hoses included for up to 30' pool
  • Require at least a 1 hp swimming pool pump or 1600 GHP to function properly.
  • No tools required and no electricity needed; Attaches to your existing filtration system
  • Ideal for cleaning bottom surface and wall; do not apply for cleaning steps
  • 1 Year Warranty for Parts Replacement (For under purchased from Amazon.com Prime and Ihubdeal ONLY )


company-logo

# 4 - Hydrotools By Swimline Clear Weighted Triangle Pool Vacuum Head

This weighted vacuum head is designed for fiberglass and vinyl-lined pools. The triangular shape is ideal for cleaning pool corners thoroughly and the angled brushes help with quick pick-up of debris. It fits standard 1-1/4-inch and 1-1/2-inch vacuum hoses and has a Snap-Adapt handle for easy assembly.


  • Weighted vacuum head for pool cleaning
  • Designed for fiberglass and vinyl-lined pools
  • Triangular shape is ideal for cleaning pool corners thoroughly
  • Angled brushes for quick pick-up of debris
  • Fits standard 1-1/4-inch and 1-1/2-inch vacuum hoses; Snap-Adapt handle for easy assembly


company-logo

# 5 - Hydrotools By Swimline Weighted Half Moon Pool Vacuum Head

This Hydrotools Swimming Pool Weighted Vacuum head is designed to work with all swimming pools. It attaches to any standard size telescoping swimming pool pole and works with either 1-1/2" or 1-1/4" vacuum hose. Swimline Hydrotools provide some of the best swimming pool replacement parts and supplies on the markets. All Hydrotools swimming pool products are designed to ensure durability and are easy to assemble. Hydrotools aims to meet all of your expectations when it comes to their products, and they back their products with a 1 year Manufacturer Warranty to help guarantee your satisfaction as a customer. Don't settle…


  • Hydro Tools weighted half moon vacuum is head weighted (1-1/2 pounds) to stay down making pool vacuuming easier
  • Hydro Tools weighted half moon vacuum accepts 1-1/4 or 1-1/2 inch vacuum hose
  • Quick snap pole adapter fits 99% of vacuum poles
  • Replaceable brushes available
  • Designed for all pools; model 8110